| Part |
Description |
Type |
| LW8-QFE |
PCI - Quad FastEthernet Adapter (half length) |
I/O |
| N40-12P1200-24GB |
Netra 1280 Server Rackmount (12U) base package, 12 x UltraSPARC-III Cu 1.2GHz processors each with 8MB L2 cache, 3 x 4-way CPU/Memory board, 24GB memory, 2 x 73GB Ultra3 SCSI 10,000rpm hot-swap disk drives, integrated Ultra3 SCSI controller, 2 x Gigabit E |
Base |
| N40-4P1200-16GB |
Netra 1280 Server Rackmount (12U) base package, 4 x UltraSPARC-III Cu 1.2GHz processors each with 8MB L2 cache, 1 x 4-way CPU/Memory board, 16GB memory, 2 x 73GB Ultra3 SCSI 10,000rpm hot-swap disk drives, integrated Ultra3 SCSI controller, 2 x Gigabit Et |
Base |
| N40-4P1200-32GB |
Netra 1280 Server Rackmount (12U) base package, 4 x UltraSPARC-III Cu 1.2GHz processors each with 8MB L2 cache, 1 x 4-way CPU/Memory board, 32GB memory, 2 x 73GB Ultra3 SCSI 10,000rpm hot-swap disk drives, integrated Ultra3 SCSI controller, 2 x Gigabit Et |
Base |
| N40-4P1200-8GB |
Netra 1280 Server Rackmount (12U) base package, 4 x UltraSPARC-III Cu 1.2GHz processors each with 8MB L2 cache, 1 x 4-way CPU/Memory board, 8GB memory, 2 x 73GB Ultra3 SCSI 10,000rpm hot-swap disk drives, integrated Ultra3 SCSI controller, 2 x Gigabit Eth |
Base |
| N40-8P1200-16GB |
Netra 1280 Server Rackmount (12U) base package, 8 x UltraSPARC-III Cu 1.2GHz processors each with 8MB L2 cache, 2 x 4-way CPU/Memory board, 16GB memory, 2 x 73GB Ultra3 SCSI 10,000rpm hot-swap disk drives, integrated Ultra3 SCSI controller, 2 x Gigabit Et |
Base |
| SG-XARY030A |
StorEdge 72-inch Expansion Rack - including 2 power sequencers and cables |
Expansion |
| SG-XPCI1FC-QF2 |
PCI - 2GB Single Fibre Channel network adapter |
I/O |
| SG-XPCI2FC-QF2 |
PCI - 2GB Dual Fibre Channel network adapter |
I/O |
| X1074A |
SCI cluster interconnect for Sun Cluster, 64-bit/33MHz |
I/O |
| X1092A |
CPU filler panel |
Base |
| X1093A |
Tape filler panel |
I/O |
| X1155A |
PCI - High speed serial interface PCI Bus adapter 2.0 |
I/O |
| X2156A |
PCI - Serial Asynchronous interface PCI bus adapter 3.0 for Solaris 8 and earlier |
I/O |
| X3150A |
PCI - GigaSwift Ethernet UTP (Copper) |
I/O |
| X3151A |
PCI - GigaSwift Ethernet MMF (Fiber) |
I/O |
| X3895A |
Cluster 4 port SCI switch. Used with Sun Cluster when expanding beyond two nodes. |
I/O |
| X4340A |
Redundant Transfer Switch with 2 x AC Modules for Sun Fire 6800 and Sun Fire Expansion Cabinet |
Expansion |
| X4422A |
PCI - Dual Gigabit Ethernet + Dual SCSI adapter |
I/O |
| X5265A |
73GB Ultra3 SCSI 10,000rpm disk drive |
Drives |
| X6297A |
20GB 4mm DDS-4 internal tape drive |
Drives |
| X6541A |
PCI - Dual Channel, differential UltraSCSI host bus adapter |
I/O |
| X6727A |
PCI - Dual FC Network Adapter with internal FC interface. 100MB/s per channel with optical interface. |
I/O |
| X6746A |
Redundant FC 8-port switch |
Expansion |
| X6758A |
PCI - Dual Channel Ultra3 SCSI host bus adapter |
I/O |
| X6762A |
Crypto Accelerator 1000 |
I/O |
| X6799A |
PCI - Single FC Network Adapter 100MB/s with optical interface |
I/O |
| X6808A |
23" 2-post Hendry Rack Mount Kit |
Expansion |
| X7051A |
2GB Memory Expansion (4 x 512MB SDRAM DIMMs) |
Memory |
| X7053A |
1GB Memory Expansion (4 x 256MB SDRAM DIMMs) |
Memory |
| X7056A |
4GB Memory Expansion (4 x 1GB SDRAM DIMMs) |
Memory |
| X7057A |
CPU/MEM Board bundle including 4 x UltraSPARC-III Cu 900MHz processors each with 8MB L2 cache, 8GB (32 x 256MB DIMMs) memory. |
Base |
| XCPU1280-442-1200 |
CPU/MEM Board bundle including 4 x UltraSPARC-III Cu 1.2GHz processors each with 8MB Ecache, 8GB (16 x 512MB) memory |
Base |
| XCPU1280-482-1200 |
CPU/MEM Board bundle including 4 x UltraSPARC-III Cu 1.2GHz processors each with 8MB Ecache, 16GB (32 x 512MB) memory |
Base |
| XCPU1280-484-1200 |
CPU/MEM Board bundle including 4 x UltraSPARC-III Cu 1.2GHz processors each with 8MB Ecache, 32GB (32 x 1GB) memory |
Base |
